04-25-2012 11:13 AM - edited 02-21-2020 06:01 PM
Hi Experts,
We have a ASA 5505 in our enviroment. We already configures two site 2 site VPN to our branch offices. Now we are planning to configure remote access VPN. So what should be consider when configuring the remote access VPN in ASA which already having site to site VPN?
Regards,
Ejaz
04-25-2012 11:33 AM
Hi Ejaz,
When you create ip-addresses for remote access pool, please make sure, it does not overlap with your inside network or dmz as I have seen there are plenty of people making such a mistake.
what version of ASA you are using?
thanks
04-25-2012 11:44 AM
Hi Rizwan,
Thank you for the responce. My ASA is 5505 software version 7.2 (4)
Regards,
Ejaz
04-25-2012 11:54 AM
I included for you, Cisco documentation for RA vpn on ASA, so please see the attached.
if you have L3 switch inside your network, where your ASA is connected, please make sure, that you have a static route in place to push your remote vpn-pool network segment to FW's inside interface.
thanks
04-25-2012 12:02 PM
Hi Rizwan,
Thank you again for the response. We have l2 switch inside ou network.
Could please send me the RA vpn configuration with radius server ?
Will this configuration affect the existing site to site VPN ?
Regards,
Ejaz
04-25-2012 12:13 PM
04-25-2012 12:33 PM
check your private message.
thanks
05-06-2012 11:42 AM
Hi Rizwan,
I have configured the Remote Access VPN in my ASA. When I try to connect it showing an error like this
"Secure remote connection terminated by peer.
Reason 433:(Reason Not specified by peer)'
Regards,
Ejaz
05-06-2012 12:19 PM
Please post your config.
thanks
05-07-2012 11:40 PM
please check your private message.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide