02-28-2006 07:08 PM - edited 02-21-2020 02:17 PM
I'm trying to migrate some Remote Access VPNs for some power admins from a router to an ASA 5500. The profile I'm using is vpnclient. When I add the access-lists to reach the inside networks (10.200 and 10.25) All that shows up on the route print command is the 10.200 network. I can ping to any server or client but cannot ping any network device. I can't ping any device in the 10.25 subnet. Any help in this would be greatly appreciated. Below is the config.
Solved! Go to Solution.
03-01-2006 06:24 AM
Hi Mitch,
Ensure subnet 10.25.x.x pass thru nat (inside) 0 e.g. access-list 102
HTH
Mike
03-01-2006 06:24 AM
Hi Mitch,
Ensure subnet 10.25.x.x pass thru nat (inside) 0 e.g. access-list 102
HTH
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide