VPN 3000 - NAT implementation

[esalvo]

Hi

I have a VPN 3000 Concentrator, and I would like to know if it can be implemented in this equipment source and destination NAT in the same way it can be implemented in Cisco routers.

I need to access to devices in the public network from devices located in the private network. In order to do this, I need to change the destination IP address of the packets that arrives to the VPN Concentrator, without encrypting the traffic.

Also, I need to access to devices in the private network from devices located in the public network. In order to do this, I need to change the source IP address of the packets that arrives to the VPN Concentrator, without encrypting the traffic.

Can it be implemented?. How can I do it?

Thanks.

Esteban.

[carenas123]

You can only do Port Address Translation (PAT) for the users going out. You cannot do static NAT on the VPN 3000 Concentrator.

Try these links:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00801ae24c.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a00800946af.shtml