VPN Site-Site Problems

[RobboRobson]

Dear all.

I currently have a Cisco Pix Firewall and a VPN Concentrator.

I have set up both of these as per the instructions at http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml

My problem is that i can connect to a host, fine, on the pix side of the VPN from a host on the concentrator, but i cannot see or ping any hosts on the concentrator side of the VPN from a host on the PIX side.

Does anyone know how i can get round this?

Thanks in advance

James

[d-mark]

Hi James,

if you can establish a connection from a host at the concentrator side to an host at the pix side, then I would think that the vpn connection itself works. Maybe some filter or access-list blocks the traffic (to setup a connection) from the pix to the concnetrator side.

HTH

Mark

[RobboRobson]

Unfortunately I haven't set any filters and the only access-lists i have is allow any ip out and the vpn access-list.

Do I need to set some kind of route or access-list??