I have a ASA 5540 on which VPN is configured (Both SSL through Browser and Anyconnect) , everything was working fine but suddenly the webpage has stopped working and gives the page cannot be displayed error , moreover anyconnect client also fails to connect to the ip.
Any Suggestions as to what went wrong ?
Can you ping the IP address of the server?
Please configure a packet-tracer on the inside interface of the ASA to catch the traffic from the VPN client to the HTTP server.
Let me know.
Thanks in advance.
the webpage tht opens on entering the WAN ip to access the VPN portal from my home itself is not responding.
https://111.x.x.x , the page is not opening.
I connect to VPN by two methods.
1) Yes , through WebVPN portal , but the portal is not opening , page cannot be displayed error
2)Cisco Anyconnect VPN Client
Both of them stopeed working simultaneously.
dtls port 450
svc image disk0:/anyconnect-dart-win-2.5.0217-k9.pkg 1
svc profiles tcs_profile disk0:/tcs_profile.xml
smart-tunnel list RDP RDP mstsc.exe platform windows
Thanks for posting and do not hesitate to let us know any question or issue you may run into.
Have a nice day.
* Please rate any post that you find helpful.