Hello,Has anyone managed to get quad camera audio working with an NVX-384 encoder/decoder pair?Here's what works:Audio passes from the encoder via ARC to a non-Cisco audio device, so I'm confident in the NVX configuration. Audio passes from the codec...
Forum Posts
Experiencing the same issue on a Room Kit Plus with Quad Cam running 11.39.1.3Quadcam SN FOC2701N1FW
by default the audio output is set to Loudspeaker that includes incoming call notification and DTMF audio. The issue is that both of those audio levels are too high but being in the call sounds fine. We have looked through the Web Interface for setti...
Resolved! Cisco Room bar
Can we connect the Cisco Room bar without using a DM Lite Transmitter and DM Lite receiver. We will have two microphones added and no more than 5 participants.
Gudday allVery recently it has been noticed that the quad camera in our main meeting room shows the meeting room as dark to external participants.These participants tell us the room looking dark, as if at dusk. The little window showing the room is v...
We are in the process of changing from on prim vrs 15. With 8865 desk phones. Has anyone come across any issues with this combination? we have reviewed the release and know the Phone will work but looking if anyone has seen any problems or gotcha inc...
We are trying to create a new interactive room setup. Part of goal is to have option to use interactive board with PC or stand alone or combine PC with interactive overlay. The board has one HDMI out and three inputs. I was able to get working as exp...
We have a Cisco Codec Pro set up with Zoom signed in mode and some external third party controls (AMX). The configs/events for Zoom in the xApi are few and seem dysfunctional. has anyone been experimenting with this?Since PresentationStarted and Zoom...
Hi All, I am looking for some guidance. A customer has downloaded the list of devices linked to control hub. When we look to confirm status under CCW-R for support the serial numbers don’t come up, most of the items are room Navigators. Historically ...
Hi all,I’m currently facing an issue with Codec Pro + Touch 10 while trying to keep the device on RoomOS 11.The codec is downgraded to RoomOS 11.32.x, and the Touch 10 remains connected and detected The issue appears during the Register to Webex p...
mein Kalender hat nicht die Funktion "vergangene Meetings anzeigen". Wie kann ich diese aktivieren?
I’m looking for guidance on a recurring issue with the Cisco Headset 730 on Windows 11 25H2 Build 26200.9106 when connected over Bluetooth. The headset pairs successfully and initially works as expected for both audio output and microphone input. How...
Resolved! Touch10 support
Hello Community, We have a customer using Webex with a Cisco Room Kit Plus and a Touch 10 panel. While the Room Kit Plus is still supported, the Touch 10 will reach End of Support starting from next February. My question is:Does the customer need to ...
Resolved! Ceiling Microphone Pro (CS-MIC-CLGPRO=)
Hi everybodyI currently have a ceiling-mounted microphone, but I'm unsure if the vibrations from the adjacent ceiling-mounted air conditioner will affect it. Although I know about the Audio exclusion zone feature, I'm still concerned about whether ph...
Hi Community,I initiated a Manual Downgrade via the Upgrade Channel and it is showing "Software upgrade in progress", although I see that it is saying Update pending, is there a way to check the actual upgrade progress?
