09-12-2019 02:35 AM - edited 07-05-2021 10:59 AM
Hello,
Would anyone be able to enlite how to configure a Cisco Catalyst 9300 with built-in WLC using AP AIR-AP2802I-E-K9C, with 2 SSID and with different IPs for each SSID?
Thank you very much,
António
09-12-2019 07:56 AM
09-12-2019 10:52 AM
Hi,
Thank you for your answer.
The model of switch is C9300-48P and the version is 16.8.1a. When I checkout on Cisco IOS XE release the available IOS XE is 16.9.3, recommended, or the latest 16.9.4 (see attachment).
Another thing, can WLC built-in on Cisco Catalyst 9300 work without a Cisco SD-Access architecture.
See https://community.cisco.com/t5/switching/cisco-catalyst-9300-wifi-controller/td-p/3874924.
Once again, thank you very much.
António
09-12-2019 11:04 PM
Just scroll down a bit and you'll find 16.11 and 16.12. The 16.9.3 is the recommended by Cisco, because it's already the third release in the 16.9 release tree.
Regarding your other question, I really don't know. I also couldn't find any manual on how to configure the wireless function on the 9300 platform. My previous link was for the 9800 platform, in the hope that it works the same.
Hopefully somebody else can chime in here, maybe @Rasika Nayanajith or @Leo Laohoo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide