cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
387
Views
5
Helpful
3
Replies
Highlighted
Participant

L3 Roam using Flex Connect

Hi,

We use Flex Connect at our remote site APs.

I would like to allow L3, client roaming between Flex Connect APs on different subnets. 

Is this possible?

And, what needs to needs configured on the controller side?

Thank you, Pat

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Master

Layer 3 roaming is not

Layer 3 roaming is not supported with a FlexConnect.  Only local/bridge mode supports 3 roaming.

-Scott 

*** Please rate helpful posts *** 

-Scott
*** Please rate helpful posts ***
3 REPLIES 3
Hall of Fame Master

Layer 3 roaming is not

Layer 3 roaming is not supported with a FlexConnect.  Only local/bridge mode supports 3 roaming.

-Scott 

*** Please rate helpful posts *** 

-Scott
*** Please rate helpful posts ***
Participant

Thanks Scott,

Thanks Scott,

....so, there is no hack around this limitation? Someone told me it was possible and I have been trying to find some documentation for it.

Maybe a future feature...?

Thanks, Pat

Hall of Fame Master

Maybe, buts it's been a

Maybe, buts it's been a request for a long time.

-Scott 

*** Please rate helpful posts *** 

-Scott
*** Please rate helpful posts ***
CreatePlease to create content
Content for Community-Ad
June's Community Spotlight Awards