08-27-2012 02:40 PM - edited 07-03-2021 10:34 PM
Hi everyone,
I've been asked to implement a point to multipoint solution which I had never done before.
My question is how many non roots can the root support?
I am planning to use 1310 bride as root with a AIR-ANT24120 and non roots AP1242 with AIR-ANT2410Y-R they wont be longer than 1 km.
I'd appreciate your comments, suggestions and design guides if there are any.
Thank you!
Solved! Go to Solution.
08-27-2012 06:23 PM
Here is the answer to your question:
Point-to-Multipoint Bridging
In a point-to-multipoint configuration, two or more non-root bridges associate to a root bridge. Up to 17 non-root bridges can associate to a root bridge, but the non-root bridges must share the available bandwidth.
08-27-2012 06:23 PM
Here is the answer to your question:
Point-to-Multipoint Bridging
In a point-to-multipoint configuration, two or more non-root bridges associate to a root bridge. Up to 17 non-root bridges can associate to a root bridge, but the non-root bridges must share the available bandwidth.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide