05-01-2019 05:20 AM - edited 07-05-2021 10:18 AM
Hi all,
Running 8.8.111.0 on an 1850 Series, with 6 SSIDs configured, I'm not able to disable the FASTLANE option by Web-GUI.
In the GUI I can select disable for the FASTLANE option and apply the settings. But entering the WLAN-setting again, the option is enabled again.
Can somebody give me the CLI command to disable FASTLANE on an SSID?
At the CLI, show WLAN 5, shows me
QoS Fastlane Status.............................. Enabled
Thanks
Willem
05-01-2019 05:41 AM
ok, I found this command and this is the result, (Failed)
(Cisco Controller) >config qos fastlane disable 5
Warning! This command will automatically disable the WLAN and
will reset the WLAN QoS configurations to defaults (Silver profile, AVC disabled).
The WLAN will be re-enabled once the configuration completes.
Are you sure that you want to continue? (y/N)y
Error: Fastlane Configuration failed.
qos fastlane disable 5
- Success
wlan media-stream multicast-direct 5 disable
- Success
wlan qos 5 silver
- Success
wlan avc 5 profile AUTOQOS-AVC-PROFILE disable
- Failed
Reverting these configurations for WLAN.
wlan qos 5 platinum
qos fastlane enable 5
wlan avc 5 profile AUTOQOS-AVC-PROFILE enable
Reverting - Failed
***********************************************
05-01-2019 05:47 AM
05-01-2019 06:02 AM
Hi Leo,
Is 8.8.120.0 better?
I'll try to install and give feedback here.
05-01-2019 06:28 AM
I updated to 8.8.120.0 but the result is the same, not possible to disable FASTLANE.
Not in Web-GUI (you can change, apply but it does not disable it)
Not in CLI:
(Cisco Controller) >config qos fastlane disable 5
Warning! This command will automatically disable the WLAN and
will reset the WLAN QoS configurations to defaults (Silver profile, AVC disabled).
The WLAN will be re-enabled once the configuration completes.
Are you sure that you want to continue? (y/N)y
Error: Fastlane Configuration failed.
qos fastlane disable 5
- Success
wlan media-stream multicast-direct 5 disable
- Success
wlan qos 5 silver
- Success
wlan avc 5 profile AUTOQOS-AVC-PROFILE disable
- Failed
Reverting these configurations for WLAN.
wlan qos 5 platinum
qos fastlane enable 5
wlan avc 5 profile AUTOQOS-AVC-PROFILE enable
Reverting - Failed
***********************************************
This Profile (AUTOQOS-AVC-PROFILE)does not seem to exist.
(Cisco Controller) >show avc profile summary
Profile-Name Number of Rules
============ ==============
(Cisco Controller) >
Any Idea left?
05-02-2019 08:47 AM
05-07-2019 06:24 AM
Hi Patoberli
I have different Environment, some may be upgraded from older, others may have been reset and started with an 8.8. release.
I could not try your solution yet, the AP is 2000KM from here, don't want to make it unavailable for me.
I'll see if I can copy the config to an test AP at my desk. This solution will definitively not have the same update history.
What I could do on my private AP, is I created an new profile with a different Name but the same SSID but without fastlane activated.
This worked fine, I deleted the first profile and renamed the new to the old name.
05-07-2019 07:17 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide