10-11-2018 07:14 AM - edited 07-05-2021 09:17 AM
Hi When we make a change and save the configuration to flash on 5508, one box window appears, which says Are you sure you want to save configuration to flash so that on a reboot the controller retains the configuration?
do you think the controller will reboot after click button "OK"? Thank you
10-11-2018 07:17 AM
No, the WLC will not reboot after a save. It is only warning you that the configuration will remain if you choose to reboot at a later date.
10-11-2018 07:39 AM
Thank you so much. i think you are right.
here are two questions on the reboot:
1. usually how often do we need to reboot? what functionality it can improve?
2. we have a pair of wlc. so when we just give reboot command to the active one, the backup one would reboot automatically?
10-11-2018 08:09 AM
Hi,
I cannot say that with a WLC I have ever had a need to reboot one to improve functionality. There are some settings that once you make them they require a restart to apply, but generally I don't restart wireless LAN controllers.
Yes, if you have a HA pair then restarting the primary will restart the standby.
10-12-2018 07:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide