cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
663
Views
0
Helpful
1
Replies
Highlighted
Beginner

Admin session timeout on 1252 Autonomous

Hi,

Is there any way to change a setting which causes a user logged in to the web browser interface (or connected via ssh) to have to re-authenticate. Im getting annoyed by being disconnected from the AP and having to re-authenticate.

TIA

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Admin session timeout on 1252 Autonomous

Hello Charles,

Sure, we can modify your timeouts through the command line:

For the Web GUI timeouts, the command in global configuration mode:

ip http timeout-policy idle <1-600 sec> life <1-86400>

For your SSH timeouts, you would want to modify the following under your vty line configuration:

exec-timeout

-Pat

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Admin session timeout on 1252 Autonomous

Hello Charles,

Sure, we can modify your timeouts through the command line:

For the Web GUI timeouts, the command in global configuration mode:

ip http timeout-policy idle <1-600 sec> life <1-86400>

For your SSH timeouts, you would want to modify the following under your vty line configuration:

exec-timeout

-Pat

View solution in original post

CreatePlease to create content
Content for Community-Ad