Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

I am trying to upgrade an autonomous IOS 1242 AP to LWAPP and I am having an issue with finding the right code to complete the upgrade.  I have upgraded the AP to c1240-rcvk9w8-tar.124-21a.ja2.tar, but now I think I need a JX version of code to have ...

jvasilko by • Level 3
  • 3304 Views
  • 5 replies
  • 0 Helpful votes

I did some searching but couldnt find what i was looking for so figured i would ask for help.Is there a decent guide on how to configure ACS5.2 for TACACS management authentication of WCS?Thanks in advance!!!

mross1572 by • Level 1
  • 1816 Views
  • 2 replies
  • 0 Helpful votes

I am still looking an answer for the antenna spacing when using 802.11n. When using a 1252 the antennas are marked A,B, and C. My question is what is the maximum distant between antenna A and C? Would it be 20 or 40 inches?Thanks,Don

dgausepohl by • Community Member
  • 2198 Views
  • 2 replies
  • 0 Helpful votes

Hi,I have a wlc5508 foreign controller sending guest to the wlc4402 anchor controller in the DMZ.Both run the same 7.0.192 code.The Anchor controller is also doing the dhcp for the quest ssid's.I have it set to passthrough, redirect to an external (i...

Does any one have some advice on configuring two bridged APs to be able to brodcast additional SSIDs, besides the P2P SSID? I have the SSID and the P2P up and communicaiting but i added another SSID for end users but i'm unable to connect. I just set...

Hi, how can i remove webauth files from WLC?I have few versions of login.tar file used for webauthentication. After uploading a new login.tar file, the wlc still show old webauth bundle files. I tried to remove customized webauth login from wireless ...

endpoint by • Level 5
  • 6550 Views
  • 8 replies
  • 0 Helpful votes

If I order the PrimeNCS appliance do I have to order licenses also? When I look in NetFormx there is no option to order licenses with the PrimeNCS appliance.

evarner by • Level 2
  • 892 Views
  • 1 replies
  • 0 Helpful votes

We have WLC-4402 and LWAP-1510, we have issue when users trying to connect to pppoe server with pppoe connection from wireless network. On LAN, pppoe connection work properly and everything is normal. Also I enable broadcast fowarding on GUI but he p...

mimidi209 by • Community Member
  • 916 Views
  • 1 replies
  • 0 Helpful votes

Hi,I tried to add WCS into ACS server and I have done the all the required configuration but still WCS is unable to authenticate thro ACS. There is no passed or failed auth report on ACS for WCS users. Can you  guide me on how to fix it?Thanks,Hassan

hassan_si by • Level 1
  • 1782 Views
  • 7 replies
  • 0 Helpful votes

Hey All,We've currently deployed the 5508 wlc(7.0.116.0) with ssid's using interface groups. We have roughly 200 access points and a mixture of 3500, 1120, 1121 and 1230 access points running a a/g/n (where applicable) environment. We are working tow...

Best regards.I have an autonomus AP Aironet 1252 (software version: 12.4(18a)JA1)I configured 3 SSID and VLANs, but the AP doesn't broadcast SSID, the vlans are working fine because I tested configuring manually the hide SSID on laptops.Also the AP b...

Hey guys, I bought 3 of the Aironet 1231g access points and cannot get any clients to connect to them.  I have tried everything from an Iphone, Droid2, Win 7 and XP laptops with built in wireless G cards. All say that they cannot connect to the wirel...

hi,i want do inventory of APs. there is option in AP tab called inventory. But each time i have to select ap , then see the serial number.is there any way, where can i c all the serial number at a time with AP's hostname?cos we use more than 80 APs. ...

Review Cisco Networking for a $25 gift card