cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
707
Views
0
Helpful
6
Replies
Highlighted
Beginner

How to authenticate Cisco IP Phones via ISE

Hello

Has anybody an idea or official link to a Cisco instruction, how to configure a Cisco ISE to authenticate Cisco IP Telephony via EAP-TLS (802.1x)?

Can anybody help?

Thanks!

Marco

6 REPLIES 6
Highlighted

How to authenticate Cisco IP Phones via ISE

HEre you go.

http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_auth_pol.html#wp1146222

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Highlighted
Beginner

Re: How to authenticate Cisco IP Phones via ISE

At first thanks for your rapid answer.

I'm looking more for a guide, how to import the certificate from the UCM and where I can config the RADIUS-Attribut "device-traffic-class=voice"?

Highlighted

How to authenticate Cisco IP Phones via ISE

Ahh, this isn't for a wireless phone is it......take a look at the below guide

https://supportforums.cisco.com/docs/DOC-22478

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Beginner

Re: How to authenticate Cisco IP Phones via ISE

This are for wired phones that support EAP-TLS.

I read your link and already know this fakts from other manuals.

Now I want to configure the Cisco ISE to authenticate these IP Phones via 802.1x - EAP-TLS.

But I can not find any Cisco guides for solving this problem.

Highlighted

Re: How to authenticate Cisco IP Phones via ISE

EAP is EAP. it doesn't matter what the end device is.  So the same config will work for any device that supports EAP-TLS.

That doc tells you what the attributes are that need to be returned

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Highlighted
Beginner

Re: How to authenticate Cisco IP Phones via ISE

Yes ok. So there is no difference between the devices.

Thanks.

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards