03-18-2019 01:45 AM - edited 07-05-2021 10:04 AM
Hi,
does anyone have experience with implementing Identity PSK on WLC release 8.5.14.0 with FreeRADIUS as AAA Server ?
We'd be glad if you could share your experience and how you managed to get it to run.
Thanks,
Thorsten
Solved! Go to Solution.
03-18-2019 01:55 AM
Haven't done it myself (only done lab testing with ISE), but the principle is the same as using ISE as it uses RADIUS.
Effectively its just using RADIUS server just responds with Access Type Access_Accept with cisco-av-pair(s) with psk-mode and psk password
There is this site that has config doing it with FreeRADIUS
http://indcontrolproto.blogspot.com/2019/02/cisco-identity-psk-and-freeradius.html
this Blog is also a good read on iPSK
http://www.wifireference.com/2017/12/10/cisco-identity-psk-what-is-it-and-how-is-it-configured/
03-18-2019 01:55 AM
Haven't done it myself (only done lab testing with ISE), but the principle is the same as using ISE as it uses RADIUS.
Effectively its just using RADIUS server just responds with Access Type Access_Accept with cisco-av-pair(s) with psk-mode and psk password
There is this site that has config doing it with FreeRADIUS
http://indcontrolproto.blogspot.com/2019/02/cisco-identity-psk-and-freeradius.html
this Blog is also a good read on iPSK
http://www.wifireference.com/2017/12/10/cisco-identity-psk-what-is-it-and-how-is-it-configured/
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: