Report on WPA client level from WLC?

[sbrooke]

I'm transitioning clients from WPA to WPA2 and I want to make sure we've gotten most of them.  Is there any way to run a report from the WLC to show encryption levels for clients?                  

[Scott Fella]

Not really. You can enable client exclusion on the SSID advanced tab. This will exclude clients that fail and you would be able to see what client device has been excluded.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Or better yet, create a new WLAN with the same SSID but different profile name. Have one configured for WPA/TKIP and the other for WPA2/AES. This way clients still on the old wpa SSID will appear as associated and you can then track them down.

Sent from Cisco Technical Support iPhone App