04-30-2024 11:53 AM
l getting error on ap is flashing red green and blue and my switch is cisco small business SF300-POE And no wifi this ap is covert to me newest version sill flashing red green blue
Solved! Go to Solution.
05-01-2024 08:55 AM - edited 05-01-2024 08:55 AM
Input power requirements |
● 802.3at PoE+, Cisco Universal PoE (Cisco UPOE ®)
● 802.3at power injector (AIR-PWRINJ6=)
|
Whether or not your SF300 switch supports 802.3at depends on the exact model number of the switch. Refer to the Power over Ethernet (PoE) table at https://www.cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data_sheet_c78-610061.html to see whether your switch supports it or not. If not then you will need a power injector or switch which does support 802.3at (POE+).
04-30-2024 11:37 PM
- That means that the AP is getting insufficient power ,
M.
05-01-2024 12:10 AM
How do l fix it ? Do l need switch with poe+??
05-01-2024 12:38 AM
- Start by looking at the datasheet of the particular AP model and look for powering requirements, then compare to switch capabilities , or find other switch model (e.g.) ; or use power adapter
M.
05-01-2024 08:10 AM
What model of AP?
What version of software?
Do you have CDP or LLDP enabled on the switch port?
05-01-2024 08:24 AM
05-01-2024 08:47 AM
05-01-2024 08:50 AM
Good Reading l orderd new switch Cisco with poe+ when arrived l hope its works?
05-01-2024 08:55 AM
Yes ap running newest version
05-01-2024 08:24 AM
Al model is airap2802i-b-k9
05-01-2024 08:55 AM - edited 05-01-2024 08:55 AM
Input power requirements |
● 802.3at PoE+, Cisco Universal PoE (Cisco UPOE ®)
● 802.3at power injector (AIR-PWRINJ6=)
|
Whether or not your SF300 switch supports 802.3at depends on the exact model number of the switch. Refer to the Power over Ethernet (PoE) table at https://www.cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data_sheet_c78-610061.html to see whether your switch supports it or not. If not then you will need a power injector or switch which does support 802.3at (POE+).
05-02-2024 08:42 AM
problem is sloved its was switch new switch is arrived with poe+ and worked normal en showing my wifi thanks everyone
05-02-2024 09:05 AM
Glad to hear you worked it out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide