05-01-2015 07:31 AM
Hello,
We have 6 x WAP321's setup via "Single Point Setup". We have enabled MAC Filtering and set to "Block all stations in list".
We have added one device into this list and confirmed this replicates around all the APs. However, it doesn't prevent the device from joining the wireless.
We have tried rebooting the APs and upgrading their firmware (1.0.5.3 ).
No difference.
Anyone else seen this or have any ideas?
Regards
Charlie
Solved! Go to Solution.
05-06-2015 08:48 AM
My name Eric Moyers. I am an Engineer in the Small Business Support Center.
I am sorry to hear that you are experiencing this issue.
I have personally used this feature several times. Can you tell me if after setting the MAC Filtering , if you went back to the Networks Tab and enabled MAC Filtering for the SSID(s) that you are wanting to prevent the MAC for associating to?
If you would contact me directly (you can find my email by holding the mouse over my picture), I would like to talk to you about your issue.
Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered.
05-06-2015 08:48 AM
My name Eric Moyers. I am an Engineer in the Small Business Support Center.
I am sorry to hear that you are experiencing this issue.
I have personally used this feature several times. Can you tell me if after setting the MAC Filtering , if you went back to the Networks Tab and enabled MAC Filtering for the SSID(s) that you are wanting to prevent the MAC for associating to?
If you would contact me directly (you can find my email by holding the mouse over my picture), I would like to talk to you about your issue.
Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered.
05-07-2015 03:05 AM
Many thanks, thats the one.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide