cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
951
Views
0
Helpful
1
Replies

WAP571 no Internet Access over switch SG350

kolar52
Level 1
Level 1

Hallo,

I have a switch SG350 with its basic configuration, I am still building my network. In the meantime I got WAP571 which is directly connected to the switch. I did initial configuration and I can connect to access point but there is NO INTERNET ACCESS.

WAP is connected to the switch on Port 5 - Trunk - Layer 2. It is assigned to VLAN1. 

DHCP on access point is enabled but the computer still doesn't get IP automatically, and I have manually set 192- address on the client to access the WAP web-interface. 

Can you help and write how to configure access point to access the internet?

Setup is: Router > Switch > Access Point 

Thanks

1 Reply 1

Sujoy Paria
Cisco Employee
Cisco Employee

Hi,

DHCP server option to provide DHCP IP to the wireless client is not available on the WAP571 device, it can get DHCP IP. So, you need a different DHCP source, either on the router or switch. It will be helpful to understand the scenario in case you can share the IP details of those devices also.