03-12-2006 11:09 PM - edited 07-04-2021 11:46 AM
Can 11g Access Point support 11b client ?
i have a Access Point AIR-AP1231G-E-K9.
Users with a 11g client adaptor is able to login successfully, but users with 11b client adaptor is not able to login.
How should i configure that AP so that 11b client can login as well ?
Should i downgrade my access point back to pure 11b ?
03-14-2006 01:19 AM
Hi
11b users should be able to log in, as this AP supports both 11b and 11g at the same time.
Please try this:
Under interface dot11Radio0, configure:
speed default.
This should set data rates to factory default settings allowing both 802.11b and 802.11g client devices to associate to the access points 802.11g radio.
HTH
03-17-2006 12:36 AM
the problem was solved after i changed the channel settings to channel 11, it was channel 12 previously on the g radio.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide