09-12-2010 09:50 PM - edited 07-03-2021 07:10 PM
hey all,
i ma having a problem with upgrading a 1152 to lightweight mode. i have tryed the cisco Update Tool ( used it successfully on other models of AP'S)
but when i try to do this one it says the lwapp image is incorect. i am using the c1250-rcvk9w8-tar.124-21aJA2.tar image. i have followed the guide on the cisco site:
thanks
Scott
09-12-2010 09:55 PM
Here's an easier method.
1. Copy by extracting the IOS TAR file into the AP using the command "archive download-sw /over tftp://
2. Make sure the AP boots into the "rcv" image.
3. Process complete.
Don't forget to rate our useful posts. Thanks.
09-12-2010 10:12 PM
Hi Leoaohoo
thanks for the fast reply, when i do that i get an error:
examining image...
" Error opening ( Timed out ) "
archive download takes 41 seconds
i have placed an IP n the AP'S BVI interface so it can ping the tftp server.
do i need to place the AP in Recovery mode? or is there somthing i am missing?
thanks
09-12-2010 10:21 PM
Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide