1262N Autonomous AP Configuration

[mike-greene]

Hi,

We have a couple of autonomous 1262's that I'd like to get configured.  I would like to put the Ethernet interface out on our Internet subnet and have the

clients get a RFC 1918 address from the radio's.  Our little Linksys is setup this way and the clients are PAT'ing off the Ethernet interface when they go to the Internet.

Is this possible with these guys or do I have to put the AP ethernet interface into the same subnet with the DHCP scope?  I don't have enough Internet IP's to hand out to every wireless client.

Thanks,

Mike

[manjeets]

Kindly review the below link it will resolve your  query:

www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml