05-20-2013 01:14 PM - edited 07-04-2021 12:06 AM
Is there a way to configure the GIG 0 interface on the 1552E Access Points to 10 Meg Full Duplex? Currently they will only work in Auto/Auto
Solved! Go to Solution.
05-20-2013 01:31 PM
When the AP has joined the WLC you can configure any AP's speed and duplex through the cli
config ap ethernet duplex
Sent from Cisco Technical Support iPhone App
05-20-2013 01:31 PM
When the AP has joined the WLC you can configure any AP's speed and duplex through the cli
config ap ethernet duplex
Sent from Cisco Technical Support iPhone App
05-20-2013 01:59 PM
Thanks for the prompt and correct answer I never thought to look to the WLC...Thanks agian
05-20-2013 02:37 PM
Most everything is done from the WLC and from the cli:)
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide