03-06-2013 06:35 AM - edited 07-03-2021 11:40 PM
Hi
is it possible to setup and use 1552 AP as a standalone AP, without WLC to act as a bridge between two locations and possible to serve the clients?
With 1142 (indoor) i can setup autonomouse mode, access 1142 AP over the http ad configure it without using WLC.
Can the same be done with 1552 without having to use WLC? Was able to setup static IP on 1552 but dont see the option to configure it further.
Thanks
03-21-2013 07:41 AM
At this page https://supportforums.cisco.com/docs/DOC-26765 I found this :
Features Not Supported on vWLC
Outdoor mesh access points (Outdoor AP with FlexConnect mode will work)
So I thought, AP would be able to download FlexConnect image!
But anyway. AP/PC/vWLC is on the same subnet. But it is impossible to ping AP. Other devices are not pingable from AP!
How this is possible? Is it normal for mesh APs?
Maybe it is impossible to use any commands even ping in MESH mode without active WLC connection?
03-26-2013 07:16 AM
Guys!
I got some really valuable information from one guy. His name is Sam. Sam says:
"Autonomous code is indeed supported on the 1552 platform. Getting the image onto the AP is somewhat tricky. Since there is no 'mode' button to hold down to perform an image recovery with, you have two options:
1) open up the unit and use the serial console to perform the image upgrade from ROMMON (difficult, but can be done without a controller) or
2) join the AP to a controller in mesh mode then use the 'config ap tftp-downgrade' command at the WLC CLI (easy, but requires a controller).
More details on this method can be found at:
http://www.cisco.com/en/US/docs/wireless/controller/3.2/configuration/guide/c32lwap.html
(config guide is old, but commands are the same in new versions of code)"
Hope this helps for everyone!
07-14-2013 06:57 PM
Hello,
Please have a look at 'Getting Started Guide: Cisco Aironet 1550 Series Outdoor Mesh Access Points'
I think this should clarify your situation.
http://www.cisco.com/en/US/docs/wireless/access_point/1550/quick/guide/ap1550qsg.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide