11-12-2012 12:16 PM - edited 07-03-2021 11:01 PM
Hi guys,
I have searched with google & here in the forums as well so if I missed this discussion I did at least make an effort first.
We have a couple of smaller remote locations running cisco 1811W routers (built in switch ports & wireless).
Now I have been tasked with determining if the wireless portion can be converted to Lightweight or not; if so what is required.
As I mentioned I have done some searching in my WCS documentation, google and the user forums with no luck.
Anyone care to offer a helpful hand before I go to Cisco and open a case asking the question?
Thank you in advance.
Mike
P.S.
I am running
WCS 7.0.230.0
WLC 5508 (same code)
Solved! Go to Solution.
11-12-2012 12:25 PM
the 1811 isn't convertable. You have to have a router that has the AP 801 module.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
11-12-2012 02:19 PM
Agree with Steve, it's not possible.
11-12-2012 12:25 PM
the 1811 isn't convertable. You have to have a router that has the AP 801 module.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
11-13-2012 05:29 AM
Thank you both for confirming that for me.
I appreciate your expertise.
11-12-2012 02:19 PM
Agree with Steve, it's not possible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide