Wireless

The docs say there is an alignment mode...even tells you what the led's mean but it doesnt tell you how to activate it.Im running the lightweight image now...No options from the controller perspective for alignment. Activated the AP cli and dont see ...

Hi, I just received a 2504 WLC and a few AIR-CAP2602-E2-K9 APs. I resetted the WLC and have that up now, reachable using the first network port.In port 3, the first PoE, I have one of the access points. I can't see it in the WLC admin gui, Im guessin...

Hi all, I installed new MSE and integrated it with cisco prime I need to know if it is neccessary to add the CAS license first to can track the clients or can track without it for trial time ?

I have a client prepping chromebooks with a 3602I and 7500 flex-connext controller. When he pulls out his "batch" appx. 32 chromebooks, he may need to press connect to SSID 2 - 6 times before it connects. However his first "batch this morning he stat...

i will upgrade WLC 5508 Ver 7.0.98.0 with License 50 AP. to Ver 7.6.110.0 will it ask to install license ?

 Hi my name is Ivan I have a question We need to work a network with high performance data applications, voice and video for a University. We have done tests with a user downloading files 4GB and simultaneous video calls with skype, and we note that ...

We have a single 5508 running 7.6.100 with just over 300 Ap's.  I've noticed since our upgrade, we're having some problems.  The bigest, is a reboot.  When the system comes up, the memory is sitting at about 56%.  It creeps up to about 86% and then r...

Hello-We are having behavior issue with our WiSM 2 communications across the RMI. We have observed switch overs because of keep alive responses. We were advised to disable the Managment Gateway Fail over which we did in a lab test whoich caused both ...

hi all, I need to know what is the meaning of "contain" for the detected rouge AP on cisco wireless lan controller ?? thanks in advance 

I want to create a simple splash page with customer logo for guest wifi access using a Cisco AP541N-A-K9. I have loaded these in WLC before, but am at a loss how to load these on an individual AP, if at all possible.Many thanks in advance,

Hi,I'm seeing the following error on our clients WiSM (WS-SVC-WISM2-K9) installed in a 6500 chassis:*dtlDataLowTask: Mar 10 08:50:21.088: %SYSTEM-3-MBUFF_ALL_USED: sysapi_if_net.c:223 No free Mbufs available.Shared memory allocation failed. Internal ...

Hi Team,I would like to have your suggestion on my current Cisco 2504 Design Issue.Currently i have 1 cisco 2504 WLC having ip on its default mgmt interface as "10.0.0.x" , Connected to my cisco Switch. DSL connection and all AP's are also connected ...

Hi, My 2504 WLC mgmt IP - 192.168.1.2/24, vlan ID -0, port -1 connected to SG300 Cisco Switch in L3 mode at trunk port no GE1. Here 3602 AP is connected with POE setup at port GE2 at SG300. Internel DHCP server enabled at WLC pool 192.168.1.100 to 19...

Hello!We bought WLC-2106 and two AP-1121G.AP-1121G was with autonomous software, so I downloaded software andswitched it to lightweight mode, but it doesn't work.I see in controller log :*Oct 13 09:43:35.437: %LWAPP-6-DISC_RESPONSE_SENT: spam_lrad.c:...