04-24-2019 09:51 PM - edited 07-05-2021 10:17 AM
Hello,
we are facing issues with an ap mounted 15m high in ceiling in one of the warehouse. Model is 2700 E and checked the power level of both 2.4 and 5G, both are at high power since there are no near by aps. But still we are getting signal only from 5G but not 2G. Few scanners only support 2.4G and facing issues. Data rates are 1, 2, 5.5 disabled on 2.4G and rest enabled.
04-26-2019 12:48 AM
04-29-2019 04:36 AM
04-29-2019 05:27 AM
04-30-2019 06:34 AM
Hi,
connect SSH or Telnet to WLC,
what's output for:
show ap config 802.11b <Name of AP>
What is the model of AP ?
What is the model of WLC?
Also you can check with Wireless Analyze Tool (for Example inSSIDer or any other free for Android/IOS) see you RSSI level from this AP, under this AP or not, before test, remember Radio MAC Address of 2.4G of this AP and look it in Tool in the place under AP.
05-06-2019 07:42 AM
05-06-2019 08:15 AM
05-06-2019 11:17 PM
05-06-2019 11:53 PM
05-07-2019 12:23 AM
05-07-2019 01:10 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide