04-14-2015 12:51 AM - edited 07-05-2021 02:55 AM
Dear Team,
I have 2 nos of Cisco 2504 WLC configured with 1 SSID each configured with different network address in same LAN.
Cisco 2504 is connected to Cisco 2960 L2 switch--->Cisco 3850 L3 switch----->Cisco ASA firewalll--->Cisco 2951 router----> internet.
Problem Description :-
Users connected to SSID of WLC 1 is not able to gain access of printer server which is configured in different vlan . The users have to disconnect from SSID 1 and have to connect SSID 2 in different WLC which is in same vlan as of printer to gain access to printer service.
Please help with your suggestions so as to resolve the issue.
Attaching a HLD for ready reference.
Regards,
Dhaval
Solved! Go to Solution.
04-15-2015 01:04 PM
what mechanism is being used for the clients to access the print server?
unicast, broadcast, multicast?
can the wireless clients on ssid 1 ping the print server?
04-15-2015 01:04 PM
what mechanism is being used for the clients to access the print server?
unicast, broadcast, multicast?
can the wireless clients on ssid 1 ping the print server?
04-17-2015 11:20 AM
Well the problem seems to be the inter-vlan.
Check:
Is your trunk configured properly to allow inter-vlan
Does your WLC in same mobility group
Check both then ping ,it should work then.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: