2504 GUI not showing clients connecting at 5Ghz

[dean-obrien]

Hi all

Recently upgraded our infrastructure to v8.0.100.0, on the 'new' landing page, the GUI is showing no clients connecting on 5Ghz, only on 2.4Ghz.

If I check from the CLI, there are clients connected on 5Ghz.

Is anybody else seeing this?

Is it just a 'bug' (does anyone know)?

Please see attached.

Cheers

[Sandeep Choudhary]

HI Dean,

There is no bug.Here is the  attached screenshot from my WLC:

I see that this is the Foreign Controller.

Can you paste the info from Anchor controller:

sh client summary

Regards

Dont forget to rate helpful posts

[dean-obrien]

Hi Sandeep

Attached is info from Anchor Ctrl.

Cheers

[Sandeep Choudhary]

Hi Dean,

Let me test your scenario. Will give the my test result in 5 minute.

Regards

[dean-obrien]

ok, cheers.

I'll await your response.

[Sandeep Choudhary]

Hi,

I test your scenario and showing as it should be.

MAC Address       AP Name           Slot Status        WLAN  Auth Protocol         Port Wired PMIPV6  Role
----------------- ----------------- ---- ------------- ----- ---- ---------------- ---- ----- ------- ----------------
48:43:xx.xxx.c3:92 AP001           1   Associated     3    Yes  802.11a          13   No    No      Export foreign

check the screenshot:

Regards