Re: 2621 Upgrade failure

framedrelay · ‎04-26-2009

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

File reception completed.

TFTP flash copy: Error, image size (18070132) larger than flash (8388608).

rommon 14 >

Do I really need to buy/replace flash? Or I still have space in flash (after format:?), how can i check this from rommon> mode?

Please help.

Sylvester

framedrelay · ‎04-26-2009

& If I reset, it gives me the magic number error.

rommon 14 > confreg 0x2101

rommon 15 > reset

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

rommon 1 >

Note, main problem is space.!!! is there anyway to free the space in flash?or check the contents of flash from Rommon> mode - If not what is the alternative?

Cheers,

Sylvester

Leo Laohoo · ‎04-26-2009

Hi Sylvester,

Downgrade to an IOS which is <24mb flash requirement.

framedrelay · ‎04-26-2009

Hi,

Thanks for the reply.

Earlier I was using c2600-js-mz.120-2.XC2, Since the router had VWIC-2MFT-T1-D1 card, i had to upgrade to IP Plus IOS which is c2600-is-mz.123-26.bin

If I downgrade to previous version, I will not able to use my Module. :(

Kindly suggest,

Regards,

Sylvester

framedrelay · ‎04-27-2009

Or shall I upgrade the flash;

Leo Laohoo · ‎04-27-2009

I think you need to add some flash to your router.