03-04-2013 05:36 AM - edited 07-03-2021 11:39 PM
Just had some more 3500i installed,but 2 of these seem to be working, but there is no green LED when no connection, and when you conneect there is no blue led.
The LEDs to change when rebooting the AP, just neve seen this before, is this a fault?
cheers
03-04-2013 06:33 AM
Yes this has been an issue and you just have to enable the led.
From the CLI of the WLC
config ap led-state enable all
Sent from Cisco Technical Support iPhone App
03-04-2013 05:25 PM
Is this an issue with recent batches of 3500s, Scott? I've had a few do it to me recently as well..
Cheers,
Ric
03-04-2013 05:29 PM
No. It's a firmware issue.
03-04-2013 05:34 PM
I had 50 recentky have this issue. Bad batch.... bad something, but didnt affect the wireless.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
03-05-2013 08:43 AM
I have had about 75 35002i V2's with the same issue. Never saw the issue on the Version 1's.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide