cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1671
Views
0
Helpful
4
Replies

3600AP crash with error log :Network interrupt loop detected

qingchang.wang
Level 1
Level 1

when this error occurs

we can't see the cdp neighbor and the wireless crash.

we login onto the ap with console , we can see the error log : “Network interrupt loop detected” . last forever!!

please help us to analysis this error

THX

1 Accepted Solution

Accepted Solutions

LIBOITF-CCIE
Level 1
Level 1

I have encountered such a problem . seems to be a bug

CSCug20166 Bug Details

'Network interrupt loop detected'; does not show AP traceback
Symptom:
An 2600 or 3600 series access point may hang, unable to communicate over
the LAN or radio. At this time, the console repetitively displays the following messages:

Network interrupt loop detected

Network interrupt loop detected
Conditions:
The trigger is some other bug that causes an interrupt level loop, such as CSCua97184.
Workaround:
Power cycle the AP.

More information:
The fix for this bug CSCug20166 does not fix the underlying bug that caused the interrupt
level loop. Rather, this fix causes the AP, when it detects an interrupt loop condition, to
crash (writing a crashinfo file), and reload.

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

Post the following:

1.  sh ver

2.  sh log

3.  dir

------------------ show version ------------------

Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Mon 10-Dec-12 23:52 by prod_rel_team

ROM: Bootstrap program is C3600 boot loader

BOOTLDR: C3600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(23c)JY, RELEASE SOFTWARE (fc1)

BJ2-WLS-AP-8F03 uptime is 43 minutes

System returned to ROM by power-on

System image file is "flash:/ap3g2-k9w8-mx.152-2.JB/ap3g2-k9w8-xx.152-2.JB"

Last reload reason:

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-CAP3602I-C-K9    (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.

Processor board ID FGL1647W2ET

PowerPC CPU at 800Mhz, revision number 0x2151

Last reset from power-on

LWAPP image version 7.4.100.0

1 Gigabit Ethernet interface

2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: E4:D3:F1:EF:7A:EC

Part Number                          : 73-14521-02

PCA Assembly Number                  : 800-37501-02

PCA Revision Number                  : A0

PCB Serial Number                    : FOC16446KE3

Top Assembly Part Number             : 800-35852-02

Top Assembly Serial Number           : FGL1647W2ET

Top Revision Number                  : C0

Product/Model Number                 : AIR-CAP3602I-C-K9  

Configuration register is 0xF

---------------------------show logging ----------------------------------------------------------

Syslog logging: enabled (0 messages dropped, 5 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.

    Console logging: level debugging, 62 messages logged, xml disabled,

                     filtering disabled

    Monitor logging: level debugging, 0 messages logged, xml disabled,

                     filtering disabled

    Buffer logging:  level debugging, 63 messages logged, xml disabled,

                    filtering disabled

    Exception Logging: size (4096 bytes)

    Count and timestamp logging messages: disabled

    Persistent logging: disabled

    Trap logging: level emergencies, 4 message lines logged

        Logging to 255.255.255.255  (udp port 514, audit disabled,

              link down),

              0 message lines logged,

              0 message lines rate-limited,

              0 message lines dropped-by-MD,

              xml disabled, sequence number disabled

              filtering disabled

        Logging Source-Interface:       VRF Name:

Log Buffer (1048576 bytes):

*Mar  1 00:00:10.311: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed

*Mar  1 00:00:10.315: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory

*Mar  1 00:00:13.819: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up

*Mar  1 00:00:17.463: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0

*Mar  1 00:00:23.811: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1

*Mar  1 00:00:26.367: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Mon 10-Dec-12 23:52 by prod_rel_team

*Mar  1 00:00:26.367: %SNMP-5-COLDSTART: SNMP agent on host BJ2-WLS-AP-8F03 is undergoing a cold start

*Mar  1 00:00:26.423: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Mar  1 00:00:26.423: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to resetlwapp_crypto_init: MIC Present and Parsed Successfully

*Mar  1 00:00:26.587: %SSH-5-ENABLED: SSH 2.0 has been enabled

*Mar  1 00:00:26.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down

*Mar  1 00:00:27.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up

*Mar  1 00:00:27.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

*Mar  1 00:00:27.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

*Mar  1 00:00:29.963: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed

*Mar  1 00:00:29.963: DPAA Initialization Complete

*Mar  1 00:00:29.963: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited

*Mar  1 00:00:30.919: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up

*Mar  1 00:00:55.295: Logging LWAPP message to 255.255.255.255.

*Mar  1 00:00:58.687: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source

*Mar  1 00:00:59.775: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar  1 00:01:00.023: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.2.250.218, mask 255.255.254.0, hostname BJ2-WLS-AP-8F03

*Mar  1 00:01:00.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up

*Mar  1 00:01:00.867: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up

*Mar  1 00:01:01.867: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up

*Mar  1 00:01:10.959: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.

*Mar  1 00:01:19.959: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Mar  1 00:01:29.959: %CAPWAP-3-ERRORLOG: Selected MWAR 'BJ2-WLS-WLC-01'(index 0).

*Mar  1 00:01:29.959: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Jun  3 04:27:50.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.2.251.250 peer_port: 5246

*Jun  3 04:27:50.483: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.2.251.250 peer_port: 5246

*Jun  3 04:27:50.483: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.251.250

*Jun  3 04:27:50.483: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.

*Jun  3 04:27:50.483: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.

*Jun  3 04:27:50.483: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Jun  3 04:27:50.483: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.2.251.250

*Jun  3 04:27:50.911: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down

*Jun  3 04:27:50.975: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Jun  3 04:27:51.051: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller BJ2-WLS-WLC-01

*Jun  3 04:27:51.111: ac_first_hop_mac - IP:10.2.251.250 Hop IP:10.2.251.250 IDB:BVI1

*Jun  3 04:27:51.111: Setting AC first hop MAC: 6c20.56bd.3e8f

*Jun  3 04:27:51.111: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Jun  3 04:27:51.183: ac_first_hop_mac - IP:10.2.251.250 Hop IP:10.2.251.250 IDB:BVI1

*Jun  3 04:27:51.183: Setting AC first hop MAC: 6c20.56bd.3e8f

*Jun  3 04:27:51.191: %WIDS-6-ENABLED: IDS Signature is loaded and enabled

*Jun  3 04:27:51.911: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

*Jun  3 04:27:51.955: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down

*Jun  3 04:27:51.963: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset

*Jun  3 04:27:52.111: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

*Jun  3 04:27:52.943: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up

*Jun  3 04:27:52.995: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up

*Jun  3 04:27:53.007: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down

*Jun  3 04:27:53.015: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Jun  3 04:27:53.995: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up

*Jun  3 04:27:54.007: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

*Jun  3 04:27:54.039: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Jun  3 04:27:55.039: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up

*Jun  3 04:28:01.459: %CLEANAIR-6-STATE: Slot 0 disabled

*Jun  3 04:28:01.459: %CLEANAIR-6-STATE: Slot 1 disabled

*Jun  3 04:42:08.891: %DOT11-4-CCMP_REPLAY: Client 0012.4091.04e8 had 1 AES-CCMP TSC replays

*Jun  3 04:57:07.103: %DOT11-4-CCMP_REPLAY: Client 0012.4091.04e8 had 1 AES-CCMP TSC replays

*Jun  3 05:01:12.079: %DOT11-4-CCMP_REPLAY: Client 0012.4091.04e8 had 1 AES-CCMP TSC replays

------------------ show flash: ------------------

Directory of flash:/

    2  -rwx       65241  May 16 2013 06:06:07 +00:00  event.log

    3  drwx           0   Mar 1 1993 00:00:12 +00:00  configs

    5  -rwx        6168   Jun 3 2013 05:07:58 +00:00  private-multiple-fs

    6  -rwx         228   Jun 3 2013 04:27:50 +00:00  env_vars

    7  drwx         960  Apr 17 2013 15:54:46 +00:00  ap3g2-k9w8-mx.152-2.JB

   48  -rwx          64   Mar 1 1993 00:01:02 +00:00  sensord_CSPRNG0

    9  drwx         192   Nov 6 2012 22:36:32 +00:00  ap3g2-rcvk9w8-mx

   49  -rwx          64   Mar 1 1993 00:01:03 +00:00  sensord_CSPRNG1

31739904 bytes total (13245440 bytes free)

------------------ show ram: ------------------

Directory of ram:/

    2  -rwx        2208   Jun 3 2013 04:28:06 +00:00  ncilib_0.txt

    3  -rwx       21139   Jun 3 2013 05:10:30 +00:00  deLog00.txt

    4  -rwx       17603   Jun 3 2013 05:10:31 +00:00  deLog10.txt

11999232 bytes total (11956224 bytes free)

------------------ dir nvram: ------------------

Directory of nvram:/

   30  -rw-           0                      startup-config

   31  ----           0                      private-config

    1  ----        4100                      lwapp_ap.cfg

    6  ----          23                      persistent-data

32768 bytes total (26572 bytes free)

LIBOITF-CCIE
Level 1
Level 1

I have encountered such a problem . seems to be a bug

CSCug20166 Bug Details

'Network interrupt loop detected'; does not show AP traceback
Symptom:
An 2600 or 3600 series access point may hang, unable to communicate over
the LAN or radio. At this time, the console repetitively displays the following messages:

Network interrupt loop detected

Network interrupt loop detected
Conditions:
The trigger is some other bug that causes an interrupt level loop, such as CSCua97184.
Workaround:
Power cycle the AP.

More information:
The fix for this bug CSCug20166 does not fix the underlying bug that caused the interrupt
level loop. Rather, this fix causes the AP, when it detects an interrupt loop condition, to
crash (writing a crashinfo file), and reload.

Cisco support team says that bug will be fixed in next releases of wlc software 7.4, 7.5 in last quarter of this year .

Only what they offer to use commands:

config 802.11a 11nSupport a-mpdu tx scheduler disable

config 802.11b 11nSupport a-mpdu tx scheduler disable

before this you must disable appropriate networks.


Review Cisco Networking products for a $25 gift card