09-10-2015 01:43 AM - edited 07-05-2021 03:53 AM
the dhcp 200 IPs pool is used up, some wifi clients should leave but occupy the IPs
it can be solved by shortening the lease time (10hours) but the colleagues have to reconnect again.
is there any way to release the IP? not to wait for expiry time
wlan, enable session timeout?
Thanks a lot.
09-10-2015 02:26 AM
To configure a DHCP timeout value, use the config dhcp timeout command. If you have configured a WLAN to be in DHCP required state, this timer controls how long the WLC will wait for a client to get a DHCP lease through DHCP.
09-10-2015 04:42 PM
we use 15 min lease time for wireless users in our campus environment :)
09-16-2015 11:14 PM
Hi,
Yes it can be solved shortening the lease time, 15-20 min lease time is enough, if you are short of IPs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide