Wireless

Hi there,I'm quite new to Cisco networking, but not to networking as a whole.We've recently had a production area covered with 5 x AP1141N which are controlled by a 2112 Wireless Controller, it provides a single WLAN for the area.In an effort to unde...

Hi I have a Cisco controller WLAN solution where I want to bridge traffic locally on a remote site, when using Cisco 1140 LWAPP.Is the only way H-REAP ? Thank´s for help !RegardsErik

Hi all,I'm wondering if Cisco offers a comparable feature to the below from SonicWall?"...High-speed secure  wireless access combined with high performance Reassembly-Free Deep  Packet Inspection™ technology. SonicWall Clean Wireless can encrypt and ...

Good monrng all.I have seen this not once but now twice in less than a week. I have several remote offices up on HREAP.  The configs were done on the WiSM using 7.0.116.0 code.  the configs were saved and the sup720 in the 6500 was upgraded and reboo...

Hello,We have two SSID's Guest and Corp. We are using 5508 controllers. The problem is that if an iPad user is connected to Guest SSID and then try to connect to Corp then it fails saying "Unable to connect to Corp". After 10-15 retires the same iPad...

My main wireless router is the WRT54GS. I have another router WRVS4400N. What settings do I need to change for the WRVS4400N to connect to the WRT54GS using wireless?Also, if I were connected with one laptop and need to use VPN, would the other lapto...

Hi everyone!I've been searching the differences between WLC 4404 and 5508 and i couldn't find themwhich are them?

Hi thereI have a problem with our WLC 2100 series (2125). Basycally internal DHCP server configured on WLC is not working. I have one AP connected to port no 7 (PoE) to bypass and eliminate problem with other equipment.Port no 7 details:IP Address: 1...

I have two 5508 and one WCS server, the controllers are in one mobility group.Now I have to change the management IP addresses on the controllers. What are the correct steps to do this?

Is it possible to schedule multiple wireless guest user accounts on wcs?Wcs allows me to schedule only when creating single guest account but not when creating multiple accounts.Sent from Cisco Technical Support iPhone App

hi guys,Here are my questions: - can the cisco 3300 (MSE) track smartphones like iphone and android? - are these smartphones considered as RFID tags?- are there any indoor RTLS systems that can track smartphones?Thanks.

i have a cisco ACS version 5.0, I need to authenticate a wireless users connected to WLC 2100 controllerwhen i connect the controller to a Dot1x port in the switch , the port go down.if any help

When I looked at the Quick Guide document on the 1260, it showed that 2.4 Ghz external antenna connects to 1, 2 & 3 connectors and 5 Ghz external antenna connects to 4, 5, & 6 connectors.So, does that mean the you cannot connect (qty 2) 5 Ghz antenna...