10-17-2013 01:09 PM - edited 07-04-2021 01:06 AM
Hi,
I'm trying to reach a 5508 via a vpn connection but cannot connect I assume because there are management ips set on the box somewhere. I just logged into another 5508 to see where that setting exists, but cannot find it.
Is that setting on the 5508 itself. If so, where?
Thanks.
Solved! Go to Solution.
10-17-2013 02:42 PM
Please go to controller and interface tab to get the mangemnet IP:-
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60mint.html
10-17-2013 06:21 PM
Do check the reachability as connecting with VPN does not affect the access to the AP, provided that no ACL or restriction is applied to the management IP.
10-17-2013 06:26 PM
Enter show interface detailed management command to view the current management interface settings from CLI. To enter the management interface ip using config interface address management ip-addr ip-netmask gateway
10-17-2013 02:42 PM
Please go to controller and interface tab to get the mangemnet IP:-
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60mint.html
10-17-2013 06:21 PM
Do check the reachability as connecting with VPN does not affect the access to the AP, provided that no ACL or restriction is applied to the management IP.
10-17-2013 06:26 PM
Enter show interface detailed management command to view the current management interface settings from CLI. To enter the management interface ip using config interface address management ip-addr ip-netmask gateway
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide