7510 WLC backup boot image showing error

DerinA-Ent · ‎06-01-2018

Hi,

I have a 7510 wlc that produces the following output after entering the "show boot" command:

(Cisco Controller) >show boot
Primary Boot Image............................... 8.0.132.108 (default) (active)
Backup Boot Image................................ Error

Has anyone seen this before and do you know why "Error" is listed for the Backup Boot Image?

Thanks in advance!

Leo Laohoo · ‎06-01-2018

It could be an bug. I noticed the controller is running an engineering release version.

Rich R · ‎06-04-2018

I'd say more likely backup image is corrupted.

Regards

R

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.190.0, latest 9800 releases, 8.5.182.11 (8.5 mainline) and 8.5.182.108 (8.5 IRCM)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs

DerinA-Ent · ‎06-25-2018

I ended up opening a support case about this but didn't really get an explanation as to why error is appearing for the backup boot image. Copying newer code to the controller moved the active image to the backup boot image slot and made the error go away.

Thanks for your help!