We have a customer using 7920 with Firmware 1.08.
He tries to test the Beta firmware (cmterm_7920_3.3.02_05_005.bin) on some 7920.
The upgrade finished correctly and after reconfiguration, 7920 register to the APS.
On two devices, he got a problem:
- The configuration menu is hidden. We try to enter the sequence *## send but without success.
- The reset with sequence *7#9#2#0#* is not working (it was working on other 7920 when locked by password)
- USB parameter is hidden, so we cannot activate it.
- We try to download an old firmware (cmterm_7920_3.3.01.03.bin) trough USB port, using the boot function after power on, but we got the message: ERR304-Memory insufficient to upload the firmware image.
- We try to use an AP with basic configuration, broadcasting SSID cisco or tsunami, but 7920 stay with the message No AP found.
So, these two 7920 are unusable now.
Have you any suggestion? Daniel Bill