01-31-2014 06:28 AM - edited 07-05-2021 12:04 AM
Hello,
I recently installed a 5508 controller with 3602i APs...I appears that my a/n radios are present, but are showing down. I checked the network settings under "Wireless" / "802.11a/n/ac" /Network and they appear to be enabled. How would I enable these?
Thank you,
Scott
Solved! Go to Solution.
01-31-2014 08:05 AM
Thanks guys, this is definitely my issue. Much appreciated.
01-31-2014 08:06 AM
One more question...if I am deplying centralized wireless with the contollers based in US, should I be ordering all US APs?
01-31-2014 08:10 AM
If all the AP are going to be in the US then you should be ordering only -A regulatory domain AP
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-31-2014 08:10 AM
Yes, if you only deploying in US then u need only for US means -A- regulatery domain on AP.
Reagrds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide