03-10-2009 02:41 AM - edited 07-03-2021 05:17 PM
Hi,
can I deploy 802.11n on AP 1242AG ?
If so, what's command have to I entry ?
Best regard
Lorenzo
03-10-2009 05:40 AM
Hi Lorenzo,
The 1242 AP does not support 802.11n :( There are currently two Cisco models that support support the IEEE 802.11n draft 2.0 standard. They are shown below;
Cisco Aironet 1140 Series wireless AP:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html
And
Cisco Aironet 1250 Series AP:
Hope this helps!
Rob
03-10-2009 02:43 PM
1250 can be Autonomous or LWAP mode but the 1140 is LWAP only mode. No idea when Cisco will release the Autonomous IOS.
If you are not using a WLC, the 1250 will need 18.5 watts of power while the 1140 can be powered using standard 15.4 watts.
03-16-2009 09:17 PM
1140 Autonomous IOS "targeting a beta in May with code release in June/July time frame" 2009.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide