cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4928
Views
5
Helpful
3
Replies

802.11u

Sheraz.Salim
VIP Advisor VIP Advisor
VIP Advisor

Kindly please some one can explain in smiple word with  good exmaple what is the purpose of 802.11u protocols. i check few IEEE doc but my head is now all over the place and i dont not understand what this technology do and how we can get benefit of it.

i shall be very greatful thanks in advance.

please do not forget to rate.
1 Accepted Solution

Accepted Solutions

Think of 802.11u this way. You can connect to a wifi hotspot from multiple providers without having the need to log in each time. Assume you have att and you connect to a Verizon hotspot at a stadium. You wouldn't need to use your  logon. Verizon would talk to att and validate you as a user. It's also called hotspot 2.0 and wifi pass point. 

Read this ...

http://www.wi-fi.org/discover-wi-fi/wi-fi-certified-passpoint

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

View solution in original post

3 Replies 3

Hi,

802.11u, which specifies how Wi-Fi access networks interface with carrier mobile WANs. The amendment was approved for publication in February, so it's possible that infrastructure and device-makers alike will begin incorporating it into their products going forward.

and yes cisco is using it.

Regards

Think of 802.11u this way. You can connect to a wifi hotspot from multiple providers without having the need to log in each time. Assume you have att and you connect to a Verizon hotspot at a stadium. You wouldn't need to use your  logon. Verizon would talk to att and validate you as a user. It's also called hotspot 2.0 and wifi pass point. 

Read this ...

http://www.wi-fi.org/discover-wi-fi/wi-fi-certified-passpoint

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Hello George

 

I wanted to thank you, I find your inputs very informative and helpful. 

 

One of our cellular operators is thinking about deploying HOT SPOT 2.0. in the network. 

It would be very helpful to review a WireShark PCAP file with Beacon signal from the AP, Network Discovery and selection(ANQP) and EPA_SIM authentication. 

 

Can you please share one reference? 

 

Many Thanks

Omer

 

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers