9115AXI-D AP Blinking RED-GREEN-BLUE Continually.

[Pranav Mhatre]

Hello Experts,

9115AXI-D AP connected to 9800 WLC Blinking RED-GREEN-BLUE Continually.

This could be due to power level or any other reason?

Troubleshooting done so far -->

Connected AP to different switch ports of 6500 / 4500 No luck.

Switch port Power level set to maximum using below command still no luck.

power inline {auto [max max-wattage] | never |static [max max-wattage]} Access point, Aironet Access Points

Please find attached snap of switch which shows consumed power as 6 while available power as 30.

Note - CDP is disabled on switch.

[patoberli]

I suggest using CDP or LLDP on the port if possible, makes your life a little bit easier.

Is there a DHCP server running in the configured VLAN?

Option 43 correctly configured?

WLC reachable via CAPWAP from that VLAN?

Can you attach a console cable to the AP and show us the bootup log?