04-06-2023 03:24 AM
Hi All,
I have two SSID with diferent policy profile and WLAN Profile their deploy in flex connect local switching centralized authentication. lets say they are SSID A and SSID B. and This is local auhtentication method not using radius.
I already configure the attribute and mac filtering device for:
mac address xx:xx:xx:xx:xx:x1 for access SSID A
mac address xx:xx:xx:xx:xx:x2 for access SSID B
But device mac address xx:xx:xx:xx:xx:x1 still can access to SSID
Attached the configuration
04-06-2023 03:48 AM
i mean, that device xx:xx:xx:xx:xx:x1 can also connected to SSID B
04-06-2023 04:39 AM
Hello
In Policy tab, did you assign the policy profile to your WLAN ?
And in Security AAA, Authorization you need to create a method list and associate with a type which is "network" and group type as "Local."
In Adcanced tab of AAA config, you need to create an Atribute list name and associate with SSID.
Here is a guide for you.
04-06-2023 04:45 AM
04-06-2023 04:54 AM
If you followed all that steps it should work. Maybe this is a case for TAC
04-06-2023 06:53 AM
- Have a checkup of the controller configuration with (CLI) : show tech wireless , feed the output into :
https://cway.cisco.com/wireless-config-analyzer/
M.
09-10-2024 11:44 AM
Need to enable AAA override on the policy profile
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide