9800 Client connectivity

[AustinJ96TX]

I have a current setup with a mobility tunnel between a HQ controller and an Anchor. The clients are going out to ISE and authenticating and connecting to the WiFi but there is no internet. Below are the current errors I am receiving. So far all I can find is it is a possible DHCP issue and the client isn't receiving an IP. Any thoughts?

[Mark Elsen]

         - FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu34650

 M.

[AustinJ96TX]

What changes would need to be made to this ACL? 

ip access-list extended redirect
10 deny ip any host X.X.X.X
20 deny ip host X.X.X.X any
30 deny udp any any eq domain
40 deny udp any eq domain any
50 permit tcp any any eq www

I have ISE for the IPs. Its BOYD guest network

[Mark Elsen]

  - No direct insights on that , I myself would more look at the current software versions being used  on the controllers and go for
     the latest advisory release 17.12.3 and check if that can help.

 M.

[Rich R]

Always refer to the TAC recommended releases (link below) for which release to be using.