9800 RRM TPC with or without antenna gain?

[merilcerpos]

i have an Ekahau Site Survey 9120AXI APs with transmit power 9 dBm (EIRP 14 dBi) on 5 GHz band, what is the equivalent setting on 9800 WLC in RRM / TPC max level?

do i set on the WLC RRM/TPC 14 dBm and antenna gain 10 x 0.5,

or do i set on the WLC RRM/TPC 9 dBm and antenna gain 10 x 0.5 dBi

[marce1000]

 - Note that  when using  default settings the 9800 will auto regulate RRM TPC (and Dynamic Channel Assignment (DCA))  , based on neighboring APs and making sufficient cell coverage , 

 M.

[luiggi-moreira]

Hi @merilcerpos , how are you?

I have the exact same doubt. Although I had opened one or more related TAC cases to discuss this, and the final answer I had was:

The value configured on TPC (Max and Min) both relate to EIRP values, then it should be final power: TX Power + Antenna Gain.

But I still have some doubts and uncertainties about this matter. Did you get this cleared somehow?

Thanks.