Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have an Ekahau Site Survey 9120AXI APs with transmit power 9 dBm (EIRP 14 dBi) on 5 GHz band, what is the equivalent setting on 9800 WLC in RRM / TPC max level?
do i set on the WLC RRM/TPC 14 dBm and antenna gain 10 x 0.5,
or do i set on the WLC RR...
hello, is there a best practice for connecting ESX Server and another Server to the network? Can these be connected directly to MX85 or is a capable MS switch recommended? Thank you.
hello,is there a way to reboot the whole stack at once? i checked underswitching - switch stacks, switching - switch ports as well as under Tools, but only found how to reboot a single switch and not the whole stackin case only single switches can be...
i would like to generate or import a device certificate for the C9800 WLC, so that there is no self signed certificate used for Web GUI.
I would do that with the guide in "Generate and Download CSR Certificates on Catalyst 9800 WLCs" https://www.cisc...
hello, does this mean for C9800 in HA-SSO and RP without RMI configuration no LACP is supported? Even for 17.6.4?
"Option 2: Single VSS switch (or stack/VSL pair/modular switch) with RP via upstream
Connecting a C9800 wireless controller HA pair to u...
thank you for your reply.as far as i can see in global network settings (wireless) the ssids are defined global, they cannot be changed in the sub-areas/sites, just inherited.Also an SSID can only be configured once (unique SSID name), same name with...
okay, thank you for specifying AP Device Pack. From my understanding though it means APs are supported on the WLC with the Device Pack, no Software Upgrade of the WLC is required as back in aireOS times. But what is not working though is WLC is runni...
