05-10-2015 01:47 PM - edited 07-05-2021 03:12 AM
When deploying the 2702 and 571 APs, what is the suggested distance between them for maximum coverage?
05-10-2015 02:39 PM
Keep in mind increasing coverage does not help unless your clients can communicate back with that AP. So AP power level should be match to client capability (~ 11dBm)
consider this when placing APs.
HTH
Rasika
*** Pls rate all useful responses ***
05-12-2015 02:28 PM
It is recommended that you space each AP apart by approximately 6 Ft (2 meters). Avoid clustering the APs or the antennas from different APs together because this could cause degradation in performance. This recommended distance is based on the assumption that both devices operate in the unlicensed band and do not transmit RF energy more than 23 dB–that is, 200 mW. If higher power is used, space the APs farther apart.
For More Information on deployment of Access Point , Please follow the below Link
http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html/index.html#pgfId-73791
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide