02-23-2014 09:53 PM - edited 07-05-2021 12:15 AM
Hello Everyone
What is the best practise for positioning the Access Point and antenna. AP models are 2600 and 3600. Can we change the radio coverage area of an AP from a WLC
Thanks < Joe >
02-23-2014 10:48 PM
Hi Joe,
Here is the document :
https://supportforums.cisco.com/docs/DOC-16627
You can change the radio coverage area of an AP when you modify the transmitter power level parameter.
The transmitter power (mW) setting determines the power level of the radio transmitter.** The default power setting is the highest transmit power allowed in a regulatory domain**. Government regulations define the highest power level for radio devices.
Regards
Don't forget to rate helpful posts
Sent from Cisco Technical Support iPhone App
02-24-2014 01:58 AM
check the following link for best preactices for AP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide