05-26-2010 10:09 AM - edited 07-03-2021 06:49 PM
I am running a 4400 controller and cant remember how to read the access point power levels. I know the range is 1 to 8 but what represents full power. Is it 1 or 8.
Thanks
05-26-2010 10:36 AM
from command line: show run-config
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
So, to answer your question: 1
05-26-2010 10:40 AM
Revised:
5GHz
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 15 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
2.4GHz
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Hope this helps you out.
05-26-2010 11:02 AM
Thanks - thats what I needed.
Chris
05-28-2010 09:55 AM
There is a lttle catch you need to know on the A side ... Depending on the channel you select the TX power is different ..Here you can read more about this ...
Example --
If you use channel 36 your max TX power is 11 dBm which is power 1 on the controller.
If you use channel 149 your max TX power is 17 dBm which is power 1 on the controller
I hope this helps...
Please rate helpful post!
Thanks
05-28-2010 10:37 AM
Oh yes, nice catch George. Excellent site, btw, I visit it often.
05-28-2010 10:44 AM
Hey Hall...
Thanks ... I have some new videos going up in the next 2 weeks and some great troubleshooting tips ...
btw -- Thanks a bunch for the rate!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: