10-31-2021 05:31 AM
Dear All
I have more than 50 AP (cisco aironet 1142) ,switch and WLC.
befor 3 days power outage occurred after resetart some of the AP can not showing the name of WiFi .
i take internet from the switch to my laptop by cable it is work.
but when i try to connect to WiFi it is not showing on the laptop or iphone or any device
the AP is working and light is green.
thank you
10-31-2021 07:44 AM
- Check the status of the radio's on those AP's through the controller GUI.
M.
11-02-2021 01:49 AM
can you explain it more for me becuse i don't have experince on it .
thank you
11-02-2021 03:07 AM
- Check this guide :
M.
10-31-2021 09:01 AM
Do you mean SSID, not broadcasting, and user device not able to see SSID?
check the AP group has that SSID?
check WLAN config and SSID config might have lost or not saved before power outage ?
11-06-2021 09:55 AM
Yes i mean that .
and i check AP groups i don’t find any AP there .
How can i add AP to group from GUI ?
thank you
11-06-2021 12:52 PM
Choose WLANs > Advanced > AP Groups to open the AP Groups page.
You see add and remove left side added, right side AP available to Add ( AP reboot once you add to AP Group)
11-07-2021 05:37 AM
if you have a videos palease put the link
thank you
11-07-2021 06:11 AM
Have you come across any time Youtube.com ?
"How to add AP to AP Group using Cisco WLC GUI" - type in google. com - then click Videos, you find plenty...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide