Access point SSID not showing

[Aziz.zahrani]

Dear All 

I have more than 50 AP (cisco aironet 1142) ,switch and WLC.

befor 3 days  power outage occurred  after resetart some of the AP can not showing the name of WiFi .

i take internet from the switch to my laptop by cable it is work.

but when i try to connect to WiFi it is not showing on the laptop or iphone or any device  

the AP is working  and light is green.

thank you 

[Mark Elsen]

  - Check the status of the radio's on those AP's through the controller GUI.

 M.

[Aziz.zahrani]

can you explain it more for me becuse i don't have experince on it .

thank you 

[Mark Elsen]

 - Check this guide :

           https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01101001.html

 M.

[balaji.bandi]

Do you mean SSID, not broadcasting, and user device not able to see SSID?

check the AP group has that SSID?

check WLAN config and SSID config might have lost or not saved before power outage ?

[Aziz.zahrani]

Yes i mean that .

and i check AP groups i don’t find any AP there .

How can i add AP to group from GUI ? 

thank you 

[balaji.bandi]

Choose WLANs > Advanced > AP Groups to open the AP Groups page.

You see add and remove left side added, right side AP available to Add ( AP reboot once you add to AP Group)

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/configuring_ap_groups.html

[Aziz.zahrani]

if you have a videos palease put the link 

thank you 

[balaji.bandi]

Have you come across any time Youtube.com ?

"How to add AP  to AP Group using Cisco WLC  GUI"   - type in google. com - then  click Videos, you find plenty...